Any song that has the same note sung over two different chords confounds conventional harmonizers. -The Vocalist LivePro™ is smarter than that.
The Vocalist LivePro is a rack processor based on theVocalist Live 4 that includes a new MIDI interface that works with keyboards as well as guitars. Utilizing the patent-pending musIQ™ - technology combining new Note Detection algorithms with state-of-the-art Harmony Generation - and the raw power of AudioDNA2, the Vocalist LivePro can create real-time harmonies with your live voice that are in key and perfectly on pitch. With all that processing power, we were able to pack it full of other features as well, including world-class Lexicon® Reverbs, Soundcraft® low-noise studio-grade mic preamp, real-time pitch correction for each voice, individual persona and gender selection per voice, configurable outputs, tuner, 99 user factory presets and more. Plus, it's available with a fully assignable optional foot switch and expression pedal so you get real-time control and kick in the harmonies at just the right moment.
musIQ™ Makes the LivePro So Easy To Use
musIQ is a revolutionary technology that eliminates the need program a song’s key or changes to create accurate harmonies. musIQ analyzes your lead vocals as well as the chords and notes played on a guitar in real-time to automatically generate perfect vocal harmonies. Simply plug into the LivePro, play your guitar and sing. The musIQ technology will ensure the harmonies are always right on.
musIQ™ is a trademark of 3dB Research Ltd.
Line In to Line Out
- Dynamic Range: 107dB A-weighted
- THD+N: 0.002% (1KHz, Gain Max, 0dBu Input)
- Frequency Response: -3dB at 25Hz and 22KHz
Analog Inputs-Guitar
- Connectors: 1/4" Unbalanced TS Connectors
- Max Input Level: 6 Vpp
- Input Impedance
- Ground Connected: 2.2M Ohms
- Ground Lifted: 4.4M Ohms
Mic Preamp
- Connectors: XLR Balanced Max Input Level Input Sensitivity for 0dBFS: -31.5dBu to +10dBu
- Input Sensitivity for Analog Clip: -15.5dBu to +20dBu
- Equivalent Input Noise (EIN): -126.5 dBu A-Weighted, Ref 150 Ohms
- Input Impedance: 2.4KOhms Balanced
- Mic Thru: XLR Male (Direct Connect to Mic In)
Line
- Connectors: 1/4" Balanced/Unbalanced TRS Connectors
- Input Sensitivity for 0dBFS: +4.5dBu to +21dBu
- Input Impedance: 10K Ohms Balanced, 5K Ohms Unbalanced
Analog/Digital Converter: 24-bits (20-20kHz, +/-1dB)
- Dynamic Range: 114dB, A-weighted
- Crosstalk: -90dB @ 1KHz
Analog Outputs-Main
- Connectors: XLR Female Balanced (MAIN)
- Output Level for Digital Full Scale, (+4dBu Nominal): +17.4 dBu
- Output Impedance: 2.2K Ohms Balanced
- Dynamic Range, SNR: 111dB, A-Weighted, THD+N: 0.002%
- Crosstalk: -110dB @ 1KHz
Aux Line
- Output Level for Digital Full Scale (+4dBu Nominal): +17.4 dBu
- Output Impedance: 2.2K Ohms Balanced
- Dynamic Range, SNR: 111dB, A-Weighted THD+N 0.002%
- Crosstalk: -110dB @ 1KHz60
Digital/Analog Converter
- D/A: 24-bits (20-20KHz, +/-1dB)
- Dynamic Range: 114dB, A-Weighted, -60dB Full Scale Input
- Crosstalk: -90dB
- Sample Rate: 44.1KHz Internal Clock
- Signal Processing: Freescale DSP56367 DSP with Custom Firmware
- All Signal Processing Takes Place at 44.1KHz Sample
- Rates, Native
Digital Outputs:
- S/PDIF: RCA Connector. Sample Rate Reflects Internal Sample Rate of D/A Converters
- USB: B Port
- USB 1.1 Compliant, USB Full-Speed Mode (12Mbps)
- Class compliant MIDI port
Digital Inputs:
Power:
- 220-240 VAC 50/60Hz
- 100VAC, 50-60Hz
- 120VAC, 60Hz
Power Consumption:
Dimensions:
- 19" x 7.5" x 1.75" (217mm x 135mm x 43.5mm) (1U 19" Rackmount)
Weight:
Environment:
- Operating Temp: 60-95 Degrees F (15-35 Degrees C)
Regulatory:
- 73/23/EEC, 89/336/EEC, 93/68/EEC
- EN55013(2001+A1), EN55020(1998), RoHS,
- EN60065 7th Edition Requires that Products Be Tested at +/- 10% of Rated Mains Voltage
- CAN/CSA 60065-03
- UL60065-05
- IEC60065 7th Ed. (2001)