A surprising number of songs trick other harmonizers because these songs just don’t work with a single key/scale setting. In fact, any song that has the same note sung over two different chords (for example, a C sung in the melody over a C maj / F maj chord sequence) is going to confound conventional harmonizers.
The Live 4 uses breakthrough musIQ™ technology to directly analyze the output of any electric or pre-amplified acoustic guitar (no special MIDI guitars or hex-outputs needed). Then it generates the correct vocal harmony. For example, if you’re singing an A over the chords that are generally found in the key of G, Vocalist will harmonize with a C. But, if you then play an A major, Vocalist will shift to the C#...because like any good harmony singer, it listens to the guitar! With musIQ, forget about the technology – just sing and play! Skip complicated programming and having to analyze each song chord-by-chord; just…
1. Plug in your microphone and guitar;
2. Pick a 3rd or 5th-above or below harmony preset;
3. Sing and play — when you want harmony, just step on the footswitch!
musIQ™ Makes the Live 4 So Easy To Use
musIQ is a revolutionary technology that eliminates the need program a song’s key or changes to create accurate harmonies. musIQ analyzes your lead vocals as well as the chords and notes played on a guitar in real-time to automatically generate perfect vocal harmonies. Simply plug into the Live 4, play your guitar and sing. The musIQ technology will ensure the harmonies are always right on.
musIQ™ is a trademark of 3dB Research Ltd.
Frequency Response:
- Line Level Inputs and Outputs: +0, –3dB 30Hz to 20kHz
Distortion (THD+IMD):
- Line-Level Inputs to Line-Level Outputs < 0.03%
- Input Level at max, 0dBu 1kHz tone.
Analog Inputs
- Guitar Input and Thru
- Connectors: 1/4" unbalanced TS connectors
- Max input level: 3.4 Vrms
- Impedance: 3M Ohms unbalanced
Mic Input
- Connector: XLR female
- Max input level, gain at max: –27dBu (–12.5dBu in limit)
- Max input level, gain at min: –1.5dBu
- Impedance: 1.3k Ohms balanced
Line Input
- Connector: 1/4" unbalanced TS connector
- Max input level, gain at max: –8dBu (+5.5dBu in limit)
- Max input level, gain at min: +18.5dBu
- Impedance: 12k Ohms unbalanced
Aux Input
- Connector: 3.5mm unbalanced stereo TRS connector
- Impedance: 33k Ohms unbalanced
Converters
- 24-bit Analog to Digital Converter
- Dynamic Range: >97dB, A-weighted, –60dB fullscale input
- Crosstalk: –85dB @ 1kHz
- Sample Rate: 44.1kHz
- 24-bit Digital to Analog Converter
- Dynamic Range: >110dB, A-weighted, –60dB fullscale input
- Crosstalk: –130dB @ 1kHz
- Sample Rate: 44.1kHz
Analog Outputs
- Line Outputs
- Connectors: 1/4" balanced/unbalanced TRS, XLR balanced
- Max output level: +19.9dBu balanced, +13.9dBu unbalanced
- Impedance: 1560 Ohms balanced, 780 Ohms unbalanced
- Dynamic Range: >102dB, A-weighted
- THD+N: < 0.03% @ 1kHz
- Headphone Output
- Connector: 3.5mm unbalanced stereo TRS connector
- Max output level: +12.6dBu
- Impedance: 10 Ohms
Expression Pedal:
The Vocalist® Live 4 can use either a standard passive guitar volume pedal or a resistance-based expression pedal. If using a standard guitar volume pedal, it should use a 250 kOhms or higher pot. If using an expression pedal, it must offer a TRS connection and offer a minimum resistance of 10kOhms.
Signal Processing:
Freescale DSP56367 DSP with custom firmware. All signal processing takes place at 44.1KHz sample rates, native.
Power:
- US and Canada: 120 VAC, 60 Hz Adapter: PS0913B-120
- Japan: 100 VAC, 50/60 Hz Adapter: PS0913B-100
- Europe: 230 VAC, 50 Hz Adapter: PS0913B-230
- UK: 240 VAC, 50 Hz Adapter: PS0913B-240
Dimensions:
- 8.25” Length x 14.18” Width x 2.08” Height
Weight:
Environment:
- Operating Temp: 32-104 degrees F, (0-40 C)